Technical Quiz On Robotics and Automation
Hello Everyone Today I come with a new and interesting quiz competition. It is a Technical Quiz Competition .It is an online quiz competition on Industrial Robotics - Support Systems . In this quiz competition everyone can participate (Faculty Members & Students who are interested in brushing up their knowledge in Robotics).It is being organized by the Robotic Club of the Department of Mechanical Engineering, LBRCE, Mylavaram, Krishna (Dt), Andhra Pradesh, India. There are no registration fee .All the question are asked in this quiz competition based on Robotics Knowledge . There are total 20 MCQ Question's. There is no negative marking. There is no time limit. All the questions are same in this quiz competition. After Quiz Completion Every Participants will receive an E-certificate on successful attempt of this quiz. The passing criterion is 40% for the Quiz. For Participating in this quiz competition first of all click on the quiz link which is given in the bottom of this post. After clicking on the link fill up the correct details name, email id, class, department, college name etc. After Fill up the the registration form you can give the exam and after complete the exam click on the submit button.
After Submitting Quiz Competition who scoring 40 % or above will receive participating certificate in your email .
After Submitting the quiz competition everyone get this type of certificate.
Here , You can find all the questions and answers of this quiz competition .Answers are 100 % correctly.
Q1) Robot dynamics deals with the determination of
a. workspace of the manipulator
b. stability of the manipulator
c. singularity of the manipulator
d. power rating of the joint motors
Q2) Coriolis force occurs, whenever
a. a link slides through a joint
b. a link rotates about a joint
c. a rotary link contains a sliding component
d. a joint is subjected to a concentrated moment
Q3) In an absolute optical encoder, the number of photo-detectors to be used becomes
a. equal to the number of concentric rings (tracks) used
b. independent of the number of concentric rings (tracks) used
c. more than the number of concentric rings (tracks) used
d. less than the number of concentric rings (tracks) used
Q4) Inductive sensor works for
a. Carbon steels
b. Stainless steels
c. Rubber
d. Plastics
Q5) Hall-Effect sensor is
a. suitable for magnetic materials only.
b. a range sensor.
c. an internal sensor.
d. a contact sensor.
Q6) Which one of the following is not a contact sensor?
a. Force/Moment sensor
b. Micro-switch
c. Limit switch
d. Proximity sensor
Q7) Which one of the following statements is FALSE?
a. Linearity of a sensor is nothing but its constant sensitivity
b. Accuracy of a sensor is nothing but its repeatability
c. Accuracy of a sensor is different from its repeatability
d. Resolution of a sensor always takes a positive value
Q8) In computer vision, the purpose of using thresholding is to
a. store image as an array of pixels
b. convert analog information of light intensity into digital form
c. remove noise from the image
d. obtain a distinction between the object and background
Q9) Robot’s motion planning problem
a. is nothing but its trajectory planning problem.
b. aims to decide collision-free path for the robot.
c. aims to ensure smooth variation at the robotic joint.
d. aims to ensure dynamic balance of the robot.
Q10) In Tangent Graph technique used for solving the find-path problem, the collision-free path for the robot is a combination of
a. external tangents between the circles and circular arcs
b. internal tangents between the circles and circular arcs
c. circular arcs only
d. either internal or external tangents between the circles and circular arcs
Q11) Navigation and Manipulation problems are related to
a. Manipulator and Mobile robot, respectively
b. Mobile robot and Manipulator, respectively
c. Manipulator only
d. Mobile robot only
Q12) An intelligent robot should have
a. adaptive controller only
b. adaptive motion planner only
c. adaptive motion planner but not adaptive controller
d. both adaptive motion planner as well as adaptive controller
Q13) Which one of the following statements is FALSE regarding Potential Field Approach?
a. It is suitable for determining collision-free path for a robot navigating among some moving obstacles.
b. Its performance is independent of the chosen potential function.
c. There is a chance of this approach to get trapped into the local minimum problem particularly for a concave obstacle.
d. The robot may suffer from some oscillatory motions by using this approach.
Q14) During single support phase of a biped robot, its Zero Moment Point (ZMP) is
a. nothing but its center of pressure point
b. nothing but its mass center
c. nothing but a point about which the sum of all moments becomes equal to zero
d. a point that has no role to play in carrying out dynamic balance analysis of a biped robot
Q15) Which one of the following motion planning approaches cannot find collision-free path for a robot moving among dynamic obstacles?
a. Incremental planning
b. Potential Field approach
c. Reactive control strategy
d. Visibility Graph
Q16) A Potential Field approach can be used to solve
a. Find-path problems only in robotics
b. Dynamic motion planning problems only in robotics
c. Both find-path and dynamic motion planning problems in robotics
d. Neither find-path nor dynamic motion planning problem in robotics
Q17) The decoded value corresponding to the binary number 101011 is equal to
a. 43
b. 44
c. 41
d. 42
Q18) Which one of the following statements is TRUE?
a. Reachable workspace of a manipulator is a subset of its dexterous workspace
b. Dexterous workspace of a manipulator is a subset of its reachable workspace
c. No relationship exists between dexterous and reachable workspaces
d. Summation of dexterous and reachable workspaces of a manipulator gives rise to its total workspace
Q19) Robot simulator is used for
a. manual teaching
b. lead-through teaching
c. off-line teaching g
d. robot programming
Q20) In soft gripper used in robots, there is
a. point contact between the finger and object
b. line contact between the finger and object
c. area contact between the finger and object
d. no contact between the finger and object
For More visualization You Can watch the video Click on the following link for watching the video.
0 Comments